Carbon Steel Wire Buckle Ball Valve

The carbon steel wire buckle ball valve produced by Shengshi Huagong is an opening and closing device with a carbon steel valve body and a threaded connection. It drives the ball (usually a stainless steel or carbon steel nickel-plated ball) by rotating the valve stem to achieve on-off control of the pipeline medium. It has a compact design and good sealing performance. It is suitable for small and medium-caliber pipeline systems, especially for high-pressure, high-temperature or corrosive media environments.

Send Inquiry

Product Description

The valve body of the carbon steel threaded ball valve is made of high-quality carbon steel, which is precision cast and surface treated (galvanized, sprayed or epoxy coated). It has strong pressure resistance and excellent impact resistance; the internal channel of the valve body is smooth, which can reduce fluid resistance.

The connection method of this product adopts threaded thread (NPT/BSP/metric thread), which is easy to install and does not require welding. It is suitable for pipes of DN15-DN50. The thread seal can be matched with raw tape or thread glue to enhance air tightness. The ball valve ball is made of stainless steel 304/316 or carbon steel coating, which is wear-resistant and corrosion-resistant. It has a built-in spring static conductive device to avoid static electricity accumulation.

Product advantages:

High strength and pressure resistance: The carbon steel valve body is more resistant to high-pressure impact than ordinary cast iron valves.
Reliable sealing: Soft seal has zero leakage, and hard seal is resistant to high temperature wear.
Flexible installation: Threaded connection saves space and is easy to maintain.
Economical and durable: High cost performance and long service life.

Application areas:

Petrochemical: oil and gas transportation, refining equipment pipelines.

Electric power: boiler steam system, cooling water pipelines.

Industrial equipment: air compressors, hydraulic systems, pharmaceutical equipment.

Construction and municipal administration: HVAC, fire protection pipeline systems.

Technical parameters

Project	Parameter description
Nominal diameter	DN15-DN50 (1/2"-2")
Pressure level	PN1.6-PN6.4 (Class150-400)
Applicable temperature	-20℃~+200℃ (depending on the sealing material)
Applicable medium	Water, steam, oil, gas, weakly corrosive chemical medium
Leakage level	ANSI B16.104 Class IV/V (soft seal can reach Class VI)
Drive mode	Manual/Turbine/Pneumatic/Electric